Results 1 to 6 of 6
Thread: welding frame-how to splice
Threaded View
-
08-01-2010 #4
Registered User
- Join Date
- Mar 2005
- Location
- NY
- Posts
- 1,097
Ideally, you would want to make the cuts as long as possible so you can put as much weld into the joint as possible, in addition to plating the joints. Trucks did this back in 2008 on a C10 pickup when they shortened the frame.
http://www.powerblockswag.com/Trucks.../tk2007-10.htm
The needs of the many outweigh the needs of the few.
-
Reply With Quote
