flywheel/flexplate weight & inertia

[mikedc]

Just got to wondering some things . . .



#1.

Flywheel lightening = faster throttle response, but not as smooth running motor as a whole.

engine rotating assy weight (crankshaft, rods, etc) reduction = same thing.

But if you can just control the amount of rotating weight by adding & subtracting weight at the flywheel in huge amounts, then why does anyone think about keeping weight off the crank/rods/etc for revving purposes? (Yes, I know there are plenty of other good reasons to want a lighter mass assembly in the motor. But people often seem to talk about lightening the assembly specifically for the flywheel-type purposes. For example, you often hear people talk about how short-stroke motors love to scream and rev quickly compared to longer stroke motors.) Is the engine's rotating weight just something that racers try to fight against (for flywheel-type purposes) only after they're already running the lightest flywheel that is practical?







#2.

What is the auto-tranny equivalent to lightening the flywheel?

A normal auto-tranny flexplate doesn't have any real excess weight on it in the first place. It's obviously not built with weight for its own sake like a manual's flywheel is. So if you wanna make the same trade-off that an aluminum flywheel would have brought a stick-shifted motor, then what do you do on an automatic? Would you make that change with a different torque converter (I assume a much tighter one)?


--------