Results 1 to 5 of 5
Thread: C5 brake hardware
-
07-26-2010 #1
Registered User
- Join Date
- Jul 2005
- Location
- Marshall , MO
- Posts
- 699
C5 brake hardware
I need to find the bolts that attach the calipers to the pins. Anybody know where I can find these? I know I can get the pins and boots from Tobin, but I did not see the other bolts on the kore3 site.
Brad Shepard
69 Malibu
Marshall, MO
-
07-26-2010 #2
Registered User
- Join Date
- Sep 2004
- Location
- Fresno, Ca
- Posts
- 379
I got all my hardware from Tobin- at a damn fine price too.
Originally Posted by shep
07-26-2010 #3
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,265
I was able to get new hardware- everything BUT the bolts- from NAPA. Can't hurt to try. I didnt need bolts, so I never looked into it. Scott
07-27-2010 #4
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
They are M8x1.25 x 20mm hex head cap screws, Class 10.9. The OE bolts have an oversized 15mm wrench size whereas the standard industrial equivalent will have a 13mm wrench size, although both are typically available through industrial sources and either will work fine. If you're ordering pins and boots, mention the bolts and we'll throw some in at no charge.
Tobin
KORE3It's what I does.
07-27-2010 #5
Registered User
- Join Date
- Jul 2005
- Location
- Marshall , MO
- Posts
- 699
Thanks Tobin, I will do that.
Brad Shepard
69 Malibu
Marshall, MO
Reply With Quote
