Results 1 to 7 of 7
Thread: ATS oil pan problem.
Threaded View
-
07-11-2010 #6
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
As Jody stated the front port is out to the filter, the aft the return from the filter.
If you plan on running the hoses forward along side the engine I suggest making your new weld-in tubes curved with a 90* on the ends. This would make hose routing significantly easier.
I've been using -10 on mine with no problems.
Last edited by CarlC; 07-11-2010 at 09:30 PM.
VaporWorx. We Give You Gas http://www.vaporworx.com
Reply With Quote
