Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668

      blinkers wont work, everything else does

      all my lights work and function properly, just my blinkers dont work. my four way flashers work fine too but when i go to signal they dont come on. -Dom

      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas




    2. #2
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Quote Originally Posted by 69projectKAOS View Post
      all my lights work and function properly, just my blinkers dont work. my four way flashers work fine too but when i go to signal they dont come on. -Dom
      Turn signal flasher relay?? You might have a separate but identical one for the hazards. If you do just pull them and swap. If the turn sigs work and the haz doesnt then you know whats up. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012

    3. #3
      Join Date
      May 2008
      Location
      Chicago
      Posts
      609
      Country Flag: United States
      If that doesn't work check the ground.

    4. #4
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      where is the relay located?-thanks Dom
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas



    5. #5
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Did you replace the flasher/blinker behind the ash tray?
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454


    6. #6
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      no i didnt but i seen it today when i put my new radio in
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas



    7. #7
      Join Date
      Mar 2010
      Posts
      24
      I am having the same problem. Hazards work, blinkers don't. Is there a separate relay for the two and where is the blinker relay located? Let me know if you figure anything out.

    8. #8
      Join Date
      Feb 2009
      Location
      Long island, New York
      Posts
      668
      Quote Originally Posted by john5670 View Post
      I am having the same problem. Hazards work, blinkers don't. Is there a separate relay for the two and where is the blinker relay located? Let me know if you figure anything out.
      yea i think there is , so im told . but i haven't got around to take a look Ive been busy at work. if i figure it out i will let you know.-DOM
      Dom Buffa
      69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas






    Advertise on Pro-Touring.com