Results 1 to 20 of 22
Thread: Wiring a Crown Vic To Spal PWM
Threaded View
-
06-04-2010 #11
Registered User
- Join Date
- Oct 2004
- Location
- Fullerton, CA.
- Posts
- 187
The Crown Vic fan will be ideal for larger radiators. The shroud measures: 26-3/4" wide and 18-3/4" tall and 19-5/8" tall through the center and the bulges. The shroud is tapered from top to bottom with the fan sitting at an angle. The shroud is 6-5/8" deep at the top and tapers down to 3-1/4" at the bottom. I'm running a small block with a long WP and should have plenty of clearance. Here's some more pics to explain the measurements.
Mike Martin
Heavy Chevy 2.0: 71 Heavy Chevy, Unisteer,SC&C, GW,Eibach,Bilstein,Helwig,Showwheels-Streeters, Carb'd LS-327 W-200-4R
LS-327 powered, Atomic EFI on the way
-
Reply With Quote
