Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Oct 2009
      Location
      HOUSTON
      Posts
      78

      wiper motor relocating kit for a 71 nova

      buddy of mine just bought a 71 nova that was on its way to being a pro street car. the firewall was smoothed out and there no place for the a wiper motor. he wants wipers for the car.... what to do, what to do

      http://photobucket.com/lesperkins

      1967 nova SS LS1 build


    2. #2
      Join Date
      Aug 2002
      Location
      Waleska Ga.
      Posts
      2,723
      Country Flag: United States
      You can mount it on the driver side cowl under the fender or you can mount it under the dash on the pass side we have done a couple of them that way.
      they seem to work just fine an clean up the firewall.
      David Sloan

      If you’re suggesting sending men with weapons of war to take my weapons of war,then I’m fairly certain that’s what’s called an act of war… and the definition of tyranny.which coincidentally is the reason for the second amendment to begin with!


      https://www.pro-touring.com/showthre...ght=fun+camaro

      https://www.pro-touring.com/threads/...lcamino-build!

    3. #3
      Join Date
      Oct 2009
      Location
      HOUSTON
      Posts
      78
      pretty much what your saying is, all custom work, not really a kit.
      http://photobucket.com/lesperkins

      1967 nova SS LS1 build

    4. #4
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I installed a DSE universal kit in mine under the dash where the glovebox is. Other than putting in 4 holes and redoing the actuator arm it wa basically a kit. The install took all of 4 hrs and was the easiest mod I did and the first item that turned on and worked before everything else.

      You can do a search for the word wiper motor and find the pics still.

      I feel it is the best place to put it because it is the easiest place to get to next to tthe original spot and you only need to cut,rotate and weld the actuator arm. Just make sure you measure so the harness isn't too short, mine was very close and 1/2 in over toward the passenger side would have made the harness need to be lengthened.

      Good luck
      May The Horsepower Be With You !!!




    Advertise on Pro-Touring.com