Results 1 to 2 of 2
Thread: Pinion Angle
-
05-09-2010 #1
Registered User
- Join Date
- May 2010
- Location
- Long Island, NY
- Posts
- 21
Pinion Angle
Just finished the motor plate tabs and dropped the motor and trans. in the car, i also have a tubular crossmember ready to be put in. Any ideas or suggestions as to what the ideal pinion angle should be? I intend to drive the living hell out of this car. I have a magnetic angle finder and a welder
. I have read that 2-3 degrees of pinion angle is ideal for a street car, but am curious if there is another number i should consider for a car that will really be put to the test. Thanks in advance.
-
05-09-2010 #2
Registered User
- Join Date
- Sep 2006
- Location
- Henderson,NV
- Posts
- 2,870
Whatever nets you the proper u joint working angles. I'd be looking for 1-2 degrees of working angle for smooth high speed operation.
Todd
-
Reply With Quote
