Help-need new pitman arm!

[blown69nova]

Need to replace my pitman arm on my 69 Nova. It has factory p/s, 307 and a 5.25" pitman arm.
I can't seem to find the correct arm listed for my application, or they contradict each other when you try to cross them.
Can anyone help me?
Thanks, Steve

[LSx_88_Ciera]

where are you looking and do you have a preferred brand

[blown69nova]

I looked on the moog/trw site, napa pro-link and rockauto.
I would like Moog but any american brand will do.
Rockauto does list a GM/Delco 19111054, but I can't find the dimentions.

[LSx_88_Ciera]

I see what you mean about the contradiction I found some places that say the moog k6582 fits and some say 68 only. I have moog and delco books at the shop I can look it up tomorrow.
Can't remember for sure what brand they use but here is a place.
http://www.p-s-t.com/pc-447-37-chevr...a-1968-74.aspx

[David Pozzi]

Moog Pitman K6151 PS, short 5.25"
According to my info this is a short PS pitman for a First Gen Camaro with same subframe as Nova up through 1974.
Summit has them and most any auto parts store should too.

[blown69nova]

Thanks, I will give it a try.

[Proforged]

edit: deleted