Results 1 to 8 of 8
Thread: 3 link rear end
Hybrid View
-
03-30-2010 #1
Registered User
- Join Date
- Sep 2009
- Posts
- 25
3 link rear end
Just a quick question. I have read alot of the links in the hardcore thread and the books that I have but I still have questions, so here goes. I am making a triangulated A arm upper link for my for my ride that has a single upper link and a panhard rod. I was under the impression that if I replaced the single upper with a A arm I could do away with the lateral locating devices (panhard, watts, etc..). My lower links are angled in about 20 degrees and angle up about 5 degrees. Also is there a a ratio for the lengths of the rear upper and lower arms. My stock lower is 24" and the single upper is 13 5/8" making the upper arm 56% of the lower in length. The layout in the car would make it difficult but not impossible to make the arm longer. Any help would be appreciated.





Reply With Quote