Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 87

    Threaded View

    1. #26
      Join Date
      Dec 2002
      Location
      Lost Wages, Nevada
      Posts
      2,684
      Country Flag: United States
      Actually, it was me with a blue crayon, some toilet paper and a pair of dial venier calipers........

      Shane, quit cutting me off. (I just saw Shanes comments, AFTER I wrote all of the following):

      Denny~ I take it you that you felt my comments were directed towards Marcus? Well, make sure you have clean underwear and socks on, because they were not. Just as well as you and I know, Marcus's thoughts and explainations are right on the money. I am not slamming Marcus or any of the big three for using software in their design or analysis process. Nor was anything I said presumed or meant to be read into as being cocky. Yes, we use the wiz bang programs as well.

      Allow me to clarify. You know me. I dont do apples to apples...... unless the second apple was cloned from the first. But there is a trend of all sorts going out and purchasing software, that unfortunately, will not produce the same numbers.

      But, for analysis of like models to even be compared, they need to start off of a same, and basic point. Unless all models to be compared are, there will be induced error. For example, if I gave you......say three numbers...... how about 2, 47.962 and 127894. What do you get? The answer is quite simple. You dont know. You dont know because you dont know what I measured or where I measured from for comparison. Unless we share those numbers, anything that you come up with is an assumption. Unless you start from the exact DRH, RH and all associated angles and geometries, it is an assumption. Is it close? I dont know, it may be. But Ill tell you that with the induced error, it may just end up to be like the circle of friends analogy. You wisper a comment into ones ear and by the time it gets back to you, your name is uncle cracker and you just screwed the neighbors cat.

      We know that this spindle is not perfect the answer for all. The direction we chose from the get go was to concentrate on the F body. We havent even really gotten started on the final A and G body components yet (component's, yes plural). We also know that the A and G body's require a shorter UCA. Now, if you toss in my eairlier comment about having something else up our sleeves, and the fact that we have Shane in the right environment. He, who is also an A body owner that we wont let outside into the fresh air and sun until our collective minds agree on any final specific component, rest assured the feed back we get from everyone is going into the melting pot.



      I too, appreciate all comments. But what you dont know, is that the previously stated numbers for the spindles are just 'rough numbers' and not of the final product. Therefore, anything with those numbers being used is, basically, an assumption. Be it an independant analysis or not, it is still not a like model.

      But, Marcus does have this one in the bag and isnt off base at all.........





    Advertise on Pro-Touring.com