Results 1 to 4 of 4
Thread: Hello
-
03-02-2010 #1
Registered User
- Join Date
- Mar 2010
- Location
- Costa Mesa, CA
- Posts
- 29
Hello
Hello!
I am glad to have found this forum. After sitting in storage for 15 years, I am finally getting started on my 1967 GTO (convertable) resto-mod. I have been looking for a good paint and body shop to take over once I get the chasis set-up. I will be installing the Global West Coil-over w/ Upper and Lower controll arms as well as the tall spindal kit w/ Wilwood 4 piston calipers. The rear will most likely be the Global West Coil-over kit on a built 12-bolt. I will be building a 428 block into a 455 and backing it up with a TKO 5 speed.
Any advise is appreciated as this will be a first for me.
thanks,
Keith
-
03-02-2010 #2
Registered User
- Join Date
- Nov 2008
- Location
- iceland
- Posts
- 1,859
Welcome to the site
Bjarni B
My Chevelle project The Awakening
http://www.1971chevelle.net/
http://www.kvartmila.is/smf/index.php?topic=27028.0
CHEVY POWER RULES!
03-03-2010 #3
Registered User
- Join Date
- Mar 2009
- Location
- overseas
- Posts
- 3,434
welcome aboard! nice project
Kevin S. (overseas in Germany)
1963 Chevrolet Impala 2d ht Coupe
www.CruznArt.com
CRUZN - Automotive Artworks
10-28-2010 #4
Registered User
- Join Date
- Mar 2010
- Location
- Costa Mesa, CA
- Posts
- 29
Been moving on the resto. Here are a couple of pics of my suspension install.
Global West Negative Roll kit up front w/ coil-over. - This kit is about 10 years old and has been sitting in boxes in my storage. Hopefully I will have time this weekend to install the steering linkage and start running the fuel and brake lines.
Next to go on is the full Global West rear coil-over set-up on a Moser 12-Bolt (via Frank at Prodigy Customs).
These are just iPhone pics. I will post better ones when I get them.
Reply With Quote
