Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Jan 2010
      Posts
      3

      Budget ls1 t56 to sbc adaptation

      Ok so I'm putting a ls1 t56 behind my sbc, but I'm on a tight budget and really cant afford a $400 bellhousing to adapt this trans. I'm still using the hydraulic clutch. So here is my question. ATS has a pdf file (supplied below) on adapting a lsx t56 to a sbc by using a 3/8 plate between the bellhousing and block. My question is instead of placing the 3/8 spacing between the block and bellhousing, why not make a 3/8 spacer to fit between the bellhousing and the trans itself?

      Reason why I ask is when you read the link it says cut the bellhousing...why not space the bellhousing away from the trans along with the throwout bearing and not cut anything. I know this is not the ideal way to do this swap but I'm itchin for money and this looks to be a cheaper alternative and I want to get this thing on the road. What do you guys think? Anyone try this or the spacer between the block and bellhousing? Thanks (sorry for the long thread and Hello everyone, I'm new to this neck of the internet lol)

      ATS pdf file:
      http://www.americantouringspecialtie...ds/files/4.pdf



    2. #2
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Take a look here for some ways to do this adaptation: http://www.camaros.net/forums/showthread.php?t=98387
      Mike Kelcy - '68 Camaro with some stuff done to it.

    3. #3
      Join Date
      Apr 2010
      Location
      Montebello, CA
      Posts
      250
      In my opinion it is better to pay more for the correct parts then to mickeymouse something you will have to play with. there are other ways to adapt the T56 to the SBC for example Mcleod adapter plate with the muncie bellhousing but its gonna weigh more than the SFI approved Quicktime bellhousing. save yourself the headache unless you can fab up some plates then thats a different story. I went with the 500 dollar bellhousing, makes your trans look cleaner and plus its SFI approved for racing.

    4. #4
      Join Date
      Oct 2009
      Location
      Ottawa, ON
      Posts
      83
      When you say "SBC" i assume you mean a GEN1 small block chev.

      The LS1 was a "SBC" as well.

      You just need the correct flywheel, and everything else will bolt up as per normal.




    Advertise on Pro-Touring.com