Results 1 to 20 of 23
Thread: New AMC guy
Hybrid View
-
03-02-2010 #1
Registered User
- Join Date
- Sep 2009
- Location
- Ontario, Canada
- Posts
- 167
It hasn't been lowered yet ... just 35 yr. old springs and the wider tires fill up the wheel wells
. To lower the rear, just use lowering blocks between spring and axle. Check the AMC forums for info. on lowering plates for front spindles (offset holes for the bolt-on AMC spindle). The lowering plates are "low-dollar" compared to the coil over kit. The KYB shocks are same as Mustang front and Camaro rear. I think some guys have changed the front coil lower seat to one from an early Mustang so they can use common Mustang springs. Not much readily available for AMC, so need to be resourceful. Hope this helps.
http://amccars.net/cgi/yabb2/YaBB.pl?num=1266243193
http://amccars.net/cgi/yabb2/YaBB.pl?num=1266243593
Duane
'74 AMC Javelin AMX
-
03-02-2010 #2
Registered User
- Join Date
- Dec 2004
- Location
- El Cerrito, CA
- Posts
- 156
here's a pic of my car with 2" lowering blocks on the rear. front has the WSC coil over kit...
-Asif- Penngrove, CA (SF bay area) asifnyc.com - AMC blog
1974 Javelin NASA American Iron road race car
1975 AMC Matador road race project
1973 AMC Javelin/AMX driver
1975 AMC Gremlin driver
1975 AMC Gremlin track rat project
Reply With Quote
