Bypass FPR mounted near tank

[Mr Nick]

This thread has a ton of good info on this, however it's EFI based.



https://www.pro-touring.com/forum/sh...ight=regulator

I'd like to know if this set up will be 'acceptable.'

Stock tank with RobbMc 1/2" pick up with -8 fittings.


-8 line to 40 micron prefilter, to Mallory 140 pump mounted near tank.
-8 line to Mallory 4309 bypass regulator mounted immediately after pump.
-8 return line right back into tank. Provisions on above RobbMc pick up.
-6 line from regulator (near tank) to Q-Jet, with another 40 micron filter along the way. Stock filter removed from Q-Jet.

Basically like this: