Air ride rear upper control arms both offset to drivers side?

[INTMD8]

Hello,

I'm currently installing an air ride system on a 65 Chevelle.

All rear upper control arms for this car that I'm familiar with are centered. As in, the tubular section of the control arm is centered within the bracket that fits over the rearend bushing.

Both upper control arms I recieved with the air ride system are made with the tube offset entirely to one side of the bracket. Both brackets are offset to the drivers side of the car and I'm measuring the rearend as being 1 inch towards the drivers side of the car vs center.

Air ride is telling me that the upper control arm brackets are both supposed to be offset to the drivers side.

Any thoughts on this from people who have installed this setup?



Attached is a picture of the arm. Both arms are identical.