Results 1 to 10 of 10
Thread: when doing your own alignments
Threaded View
-
02-03-2010 #4
Registered User
- Join Date
- Mar 2005
- Posts
- 345
Once i started to use turntables the alignment settings were dead-on. IOW, I could drive off the plates, around the block, back onto the plates, and get the exact same measurements that the front end was set to previously.
It may be that the turntables you are using do not move easily enough. It should be that the car can be easily moved while on the plates (which one needs to be careful off while doing the alignment). That is, the plates move such that they are as slippery as ice.
Bob
-
Reply With Quote
