Results 1 to 20 of 28
Thread: I need a welder recommendation
Threaded View
-
01-27-2010 #20
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I have to wonder if .007" of slop will make any difference in the feeding quality....but we use Bernard here at work with really large wire compared to what you are talking about, so we don't change the liners unless drastically changing the wire size. Anyway, I figured that I would link to their page so you can read it and you can decide what you need to do for your situation.
http://www.bernardwelds.com/articles/article22.htm1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
Reply With Quote
