Results 1 to 7 of 7
Thread: Coil Packs - Which Connector
Threaded View
-
01-12-2010 #1
Registered User
- Join Date
- Feb 2007
- Location
- USA, TN
- Posts
- 850
Coil Packs - Which Connector
I'm trying to design an LS1 extension harness for remote coils for a friend on another board but I'm not sure if the grey 7/8 pin connector going to the four coils is a Metri Pack 150 or 280. Does anyone know if the pins on the connector are 1.5 or 2.8mm wide?
This is not the connector going to the individual coils. It is the connector that connects each bank of cylinders.
-
Reply With Quote
