new guy and one of the few fords 1966 mustang

[sacarguy]

well so far so good .. installed a mustang two ifs and a rear four bar and the mini tubs time to strip the interior and make the body perfectly straight

in order to keep the car as clean as possble the tops of the fenders will not be bolted to the inner fenders rather i will cut off the bolt hole part leave a small 8th inch lip and tig them the full length to the inner fender so they can be smoothed and cleaned then you will have a smooth seamless transision from fender to inner wheel well.

the inner well wells will also be smoothed to the frame and fire wall
the fire wall ill be completely flat with a bulkhead fiting inside the inner fender for the ac lines.

The car will be powered by a 07 gt-500 engine with a tko-600 transmission and a 3.4 liter whipple charger .. expcting aprox 780-800 rwhp

It has four wheel 13 inch willwood brakes with polished calipers as well as a panhard setup in the rear.

wheels are foose nitrous with gunmetal centers 20x10 and 20 x 12

some pics so far
the ride height

front suspension work










rear work