Steering wheel whoes

[aany001]

Guys I picked up a real nice steering wheel at a car show a few years ago but never bought the hub adapter cause I wasnt sure what column I was going with.Now I need to find a hub attachment and I am having trouble finding one.Anyone come accross this?? The wheel has a 6 bolt pattern and I wanna attach it to my factory tilt column in my 69 camaro.
Thanks
Steve

[86Cutlass383SR]

You may just have to search around on the 'net and see if you can find the steering wheel you have and order the correct adapter.

If nothing else you might have to find a billet adapter that will fit inside the center hole on your wheel and re-tap some of the holes to fit yours.

Hopefully a vendor on here will have one that will work.

[zbugger]

Can we get a picture of it to see if any of us can help out?

[aany001]

thanks everyone I will get pics as soon as I get my kids settled down.....MERRY CHRISTMAS everyone!!!!!!!!!

[aany001]

Here we go....I took some photos and some measurements.The bolt holes centre to centre are 2.75".I hope someone can help me out.

[Jim Nilsen]

If I remember right ,factory Corvette wheels are a six bolt pattern. The Vette places might have an adapter?

[nowukno]

Yep,Try to get in touch with **** over at Guldstrand Motorsports hey might be able to help

[nowukno]

Get in touch with Guldstrand Motorsports. They may be able to help..

[Roadbuster]

That could be a Momo pattern:
See here

Momo wheels have a 6 bolt, 2.75" diameter pattern according to this.

Jon

[nowukno]

Does look like a momo/sparco pattern

[ibuildm]

Try Ididit. http://www.ididitinc.com/accessory_p...l_adaptors.htm The have beautiful billet polished or satin wheel adapters for almost every wheel. It fits their column and they will fit all GM columns from 69-94.
Tim