Results 1 to 4 of 4
Thread: New member from London, England
-
12-22-2009 #1
Registered User
- Join Date
- Dec 2009
- Posts
- 2
New member from London, England
Hi there.
I found this site and must admit i'm very impressed with the cars and their quality on here. Anyway, here's my car, it's a 70 Mustang fastback which is about to be converted into a Pro Tourer. The engine is a 550hp 351 c with a 150hp Nitrous kit on top. It's run a 12.0 at the the drags witout the nitrous and an open diff but i'm looking for low 11's next year. My plans are new paint next month (black pearl) Ron Morris coil overs up front and a Heidts 4 link 9" rear with 350 gears. I just fitted the wheels and soon it'll be sitting a lot lot lower.
Here's a short vid of the car as it looks now.
Thanks
Phil
-
12-22-2009 #2
Registered User
- Join Date
- Oct 2004
- Location
- St.Anne Il
- Posts
- 3,924
Welcome//.sweet car..im not to sure but you might be our first member from London..at least first i ever recall being on here..
Darrin Stalnecker
1969 Camaro Convert full pt pr
2007 Corvette Supercharged
1968 Camaro LS1 T56
http://www.fquick.com/dropit69
12-22-2009 #3
Registered User
- Join Date
- Mar 2009
- Location
- overseas
- Posts
- 3,434
welcome! nice ride!
Kevin S. (overseas in Germany)
1963 Chevrolet Impala 2d ht Coupe
www.CruznArt.com
CRUZN - Automotive Artworks
05-02-2010 #4
Registered User
- Join Date
- Dec 2009
- Posts
- 2
Well the car is pretty much finished now, I've just got to fit the Heidz 4 link rear. The spec is Ron Morris coil overs up front, Global west strut rods, 351 Cleveland backed up by a C6. The engine is 550HP WITH A 150HP nitrous kit and currently runs 12's but is good for mid 10's. The car is mainy road use but will see some drag action ust for the fun of it. The stripes were fitted today and the drag rims are fitted just to confirm clearance on the rear.
Phil
Reply With Quote
