Results 1 to 7 of 7
Thread: Disc/drum rears locking up?
Threaded View
-
12-21-2009 #5
New to Pro-Touring
- Join Date
- May 2008
- Posts
- 7
Yes I did bench bleed the master.Not sure if there is a residual valve in the front port.I've never had a problem bleeding brakes 35 years worth.
Originally Posted by Apogee
Did you bench bleed the MC fully? You can confirm that it is fully bleed by plugging both outlet ports and pushing on the piston...if it strokes less than 1/4", you should be good. Is there a residual pressure valve in the front port of the MC for the rear brakes? Sounds like you've potentially got a combination of things going on.
Tobin
KORE3
I'm surprised the rear are working with how poorly they bleed.
Could this be a quick take up master like the S10's? Combination of other problems I'm ready to listen.And answer questions
Had no prolems with the rears when it was stock drum/drum 1" manual master so I know they are fine.
-
Reply With Quote
