Results 1 to 9 of 9
Thread: Exhaust tips?
-
11-23-2009 #1
Registered User
- Join Date
- Jan 2006
- Location
- McKinney, TX
- Posts
- 1,623
Exhaust tips?
Currently have dumps and I am getting tired of the booming. Should I
1) keep the exhaust hidden,
2) Bring tips (3" slant) out under tail panel, or
3) cut out the tail panel and run the tips under that?
Examples:
Cut out:
Hidden:
66 Mustang "Project: Ballin on a budget"
89 Mustang "Box Wine"
-
11-23-2009 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I have mine routed like the ones under that Trans Am....mainly to keep the smell of exhaust on the outside of my car.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
11-23-2009 #3
Registered User
- Join Date
- Jan 2006
- Location
- McKinney, TX
- Posts
- 1,623
Do you like it? Does it drone?
Originally Posted by John Wright
66 Mustang "Project: Ballin on a budget"
89 Mustang "Box Wine"
11-24-2009 #4
Registered User
- Join Date
- Nov 2008
- Location
- Milwaukee, WI USA
- Posts
- 440
I wouldn't cut any sheetmetal.... I would use the TransAm setup...
1969 Camaro SS, 350(NOM), M21, 12 Bolt Posi, 01B (Jan 69) LOS Build
11-24-2009 #5
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
i dont like seeing exhaust tips.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
11-24-2009 #6
Registered User
- Join Date
- Jun 2005
- Location
- Greenwood, SC
- Posts
- 2,314
ditto, i always prefer hidden. One of my favorite parts of second gens is how naturally they lend themselves to a setup like this.
11-24-2009 #7
Registered User
- Join Date
- Nov 2007
- Posts
- 30
Hidden.
11-24-2009 #8
Registered User
- Join Date
- Jan 2008
- Location
- BROOKLYN .NY
- Posts
- 155
KEEP IT CLEAN
11-24-2009 #9
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,838
Keep it hidden but angle the outlet so that the sound waves bounce out behind the car and not back to it. If it is still bad you can try adding a rearward facing tip.
VaporWorx. We Give You Gas http://www.vaporworx.com
Reply With Quote
LOOK OUT NO BRAKES
