Results 1 to 7 of 7
Thread: Rear end clamp for brake lines
Threaded View
-
10-19-2009 #3
Registered User
- Join Date
- Jan 2005
- Location
- Northern Colorado
- Posts
- 51
http://www.speedwaymotors.com/Stainl...ign=GoogleBase
I've used ones like these several times across 9" housings. Just drill and tap the tube for the #10x32 screws provided. Usually I'd try to bend the flat portion of the tab so that the clamp would follow the radius of the tube. I would avoid putting any on the center housing, especially if the rear is assembled to avoid getting any drill and tap shrapnel in there. You should be fine on the tubes though.
Adam MoyerAdam Moyer
'69 Cutlass "S"
-
Reply With Quote
