Results 1 to 11 of 11
-
09-22-2009 #1
Registered User
- Join Date
- Aug 2004
- Location
- New Jersey
- Posts
- 1,315
Removing baked-on oil from stainless exhaust
Anyone know what the best/easiest method is for removing baked on oil stains from stainless exhaust?
Had a slight oil leak from the dipstick and it schmutz my exhaust a bit.
ThanksCamaro Convertible Build Pics - http://s447.photobucket.com/albums/qq198/rob07002/
www.musclerides.com
Rob Stevens
-
09-22-2009 #2
Registered User
- Join Date
- Sep 2006
- Location
- Henderson,NV
- Posts
- 2,870
I'd try fine steel wool with soap and water.
Todd
-
09-22-2009 #3
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
If it isn't highly polished, just like a natural or brushed finish...0000 steel wool, you can clean glass windows with it also.
Originally Posted by Vegas69
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
09-23-2009 #4
Registered User
- Join Date
- Aug 2004
- Location
- New Jersey
- Posts
- 1,315
Dammit, you mean elbow grease! Was hoping for something a little more majical. Originally Posted by Vegas69
Camaro Convertible Build Pics - http://s447.photobucket.com/albums/qq198/rob07002/
www.musclerides.com
Rob Stevens
-
09-23-2009 #5
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
LOL...I understand. Originally Posted by rob07002
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
09-23-2009 #6
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,838
An acid type wheel cleaner may be effective, and it may not. Just don't spray it where you don't want it.
VaporWorx. We Give You Gas http://www.vaporworx.com
-
09-24-2009 #7
Registered User
- Join Date
- Aug 2004
- Location
- New Jersey
- Posts
- 1,315
What about oven cleaner like easy-off or something? Seems to do the trick after my Wife cooks lasagna, LOL!
Camaro Convertible Build Pics - http://s447.photobucket.com/albums/qq198/rob07002/
www.musclerides.com
Rob Stevens
-
09-27-2009 #8
Registered User
- Join Date
- Aug 2004
- Location
- CHICAGO SUBURBS
- Posts
- 761
Oven cleaner will work it just might discolor the pipes. And it will eat paint. The pipes will shine up afterward tho.
Frank B. 1968 Camaro 355 Procharged 6 speed. 1983 V8 S10. 1984 Monte Carlo Magnusen Charged iron 6.0. Plus a few other junkers!
-
09-27-2009 #9
Registered User
- Join Date
- Jan 2009
- Location
- Van Nuys, CA
- Posts
- 198
Simple green works to clean every thing make sure you use the concentrate and don't dilute. Make sure engine is cool soak the exhaust in simple green. get a coarse brush and scrub lightly. then rinse off. repeat if needed.
Mike
-
10-07-2009 #10
Registered User
- Join Date
- Sep 2008
- Location
- Austin, Texas
- Posts
- 72
Originally Posted by Vegas69
Has worked great for me
-
10-28-2009 #11
Starting The Transformation
- Join Date
- Aug 2004
- Location
- Maysville, KY
- Posts
- 156
I use Neverdull and it works great.
Kevin Turner
Maysville, KY
3-69 Camaro's
02 S10 extended cab that's street legal & runs 10's on motor and 9's with spray.
04 GMC Denali Quadsteer truck black with black 22's.
04 GTO LS1 that loves to be sprayed and meet imports on the street.
-
Reply With Quote
