Project Lime Time Camaro

[customshop]

We have the trunk almost finish, 2 Sony 10" subs, and Sony amp, NOS bottle, compressor from Firestone, Carbon fiber covered panels. Tail light installed, headlights installed all wiring done to them, adding driving lights where the hole in the grill are. Turn signals are in the headlights. brake boost installed, running brake line Classic tubing stainless steel, now and the fuel line is from Tube Tech. rad. hoses are on and the Classic auto air kit is finished up as well.
The Kwik Performance brackets fit perfect. I used the Corvette version so it gave me a little more room betwen the engine and rad. Radiator is from Mark 7 radiators. they made it to specs I asked for and bolted right up. They even offer black anodizing but I did not have time to wait the extra 2 weeks. Spal dual 11" fans are installed and wired to the painless harness, I did have to get a Speartech 4l60e to 4l80e conversion wire kit. Lokar shifter is installed, with the boot having the indicator on it. i used all of the Midnight series so the pedals and the shifter plate are Black anodized, look sweet.
got all of the Steel Rubber seals installed.
7 days till we leave!!! it gonna be close but we should make it.