Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Mar 2007
      Location
      Petaluma Ca.
      Posts
      57
      Country Flag: United States

      67 Camaro radiator/fan setup??

      I am looking for an aluminum radiator and electric fan for my 67 camaro. (350 small block)
      I like the Be-Cool 1009 over the Summit model 380456 (same $$)
      I am wondering what electric fan set ups you are running in your rides.
      I think I want a shroud?
      Not sure if I want one or two fans?
      How do I figure out how much CFM I need?
      I DO NOT want to use the plastic zip tie attachment for the fan (that is what killed my existing radiator)
      How else can I attach the fan to my new radiator?
      I like the looks of the Be-cool kit but $1300 is more than I can spend right now......

      I searched this forum for some answers, but most of the threads I saw were a coulpe years old, hoping someone makes a kit of some sort or some of you can chime in with part #'s and /or pictures of your set ups.
      THANK YOU



    2. #2
      Join Date
      Sep 2006
      Location
      Zelienople PA
      Posts
      59

      Griffin Radiator

      I went with a Griffin radiator that they make specifcally for the first gen camaros/firebirds. It bolts right into the core support using the existing mounting holes. For a fan, I bought the Be Cool brackets that Summit/Jegs sell (only need two for the top). Had to bend them a little to make them work, but no big deal. The fan itself is the famous Lincoln Mark VIII fan and it is the best that I have had and it's built in schroud almost covers the entire radiator. Think I had to trim about 1/4" of depth off of the fan to get it to fit between the radiator and my water pump. Just marked it and cut it of with a rotory cutting tool and then covered the edge with 3/8" rubber hose.

      The hole package works great and keeps my nearly 600HP motor running cool. Don't know price for the radiator anymore, but the fan can be had for about $100 on ebay and the brackets aren't bad. Will need to run a relay kit to handle the fan, it draws a ton of current at start up.
      Attached Images Attached Images  
      1969 Firebird 400, Pontiac Powered 585HP/565TQ, TKO 600, Bonspeed Big Blocks, Nitto 555's, Hydratech, Speedtech Control Arms, QA1 Coilover conversion kit, other stuff

    3. #3
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      We have PRC units, with aluminum shroud and SPAL dual fans for around $900. Awesome units. www.prchotrod.com
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    4. #4
      Join Date
      Dec 2004
      Location
      bowling green,ky
      Posts
      845
      Country Flag: United States
      x2 on the prc. i purchased one last year w/dual fans and shroud. it made a huge difference compared to my big block rad and dual fans. probably 15 degrees minimum. i am running a 413sbc and does not get over 180 with a/c on period.

    5. #5
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      We have these in stock.

      We just finished building 5 more of our killer LSX radiators and have them in stock and ready to ship. These are custom built for to Prodigy Customs specs in Double Pass design for extra cooling with both inlet and outlet on the passenger side. These radiators have a steam line line fitting required for proper LS1 cooling. They use dual Spal 13" for total of 3420CFM fans. Our Prodigy Customs Cool Package comes complete with a relay hook up kit, temp sender control for fan on / off, and billet radiator cap. These radiators list for $1220, We normally sell the Cool Package for $950 + shipping. We have 5 of these in stock and are selling these packages for $900 and free shipping until these are gone.

      Not just for LSX!

      While built for LSX, we have many of these installed on old school big and small blocks with use of a swivel water neck. The swivel neck and double pass radiator is something you want to consider no matter what engine you have. Water Passes through a Double Pass design radiator in a Z pattern essentially making 2 trips through the radiator instead of just one pass of a standard old school cross flow radiator. The double pass design radiators can trim water temps up to 20 degrees of extra cooling.

      Other applications and customs radiators available

      We also build these for most any other application, and do custom applications too. Call for your needs.

      Below are a couple pics. Look close, These are show quality in standard finish and polish very easy. And yes we do have a polish option and integrated condenser option on custom builds.

      Compare this radiator heads up to other quality radiator offerings at $200, $300, even $400 more for equal specifications and quality, and you will see what a great deal these are.

      Quality guaranteed! At Prodigy Customs we install, test and use what we sell in our shop! That means something!





      $900 Cool Package Includes: Billet Radiator Cap, Dual fan relay harness, 195 / 165, On / Off temp control switch and free shipping

    6. #6
      Join Date
      Sep 2006
      Location
      Zelienople PA
      Posts
      59
      I have to admit Frank, that's pretty sweet setup for somebody that hasn't already upgraded.
      1969 Firebird 400, Pontiac Powered 585HP/565TQ, TKO 600, Bonspeed Big Blocks, Nitto 555's, Hydratech, Speedtech Control Arms, QA1 Coilover conversion kit, other stuff

    7. #7
      Join Date
      Oct 2007
      Posts
      1,872
      Yes that is very Nice and reasoniabe to boot... So since I dont expect to need on this year you think you will have somthng comperiable next fall?
      From a place you will not see comes a sound you will not hear....

      67 Camaro In progress

      https://www.pro-touring.com/showthre...-Tap-67-camaro

    8. #8
      Join Date
      Sep 2008
      Posts
      48
      I installed a BeCool setup in my 67 Camaro with a Ramjet 350. Single Fan and I think it was something like 1800 cfm (can't remember for sure though). It works perfectly and probably one of the best purchases I have made. Car runs at about 185 degrees in stop and go traffic, and I am in New Mexico (90 plus degrees pretty much all summer long). The fan is installed with four brackets that sandwich the top and bottom of the radiator. I do not have a shroud. I think I paid something like 1100 for the whole setup. I know it is pricey but seriously worth the $!

      My brother did basically the same setup in his 67 Camaro with a 502. The only difference is he did the dual fan set up. He says he has the second fan on a switch and he has never turned it on.




    Advertise on Pro-Touring.com