roll cage quick release

[69projectKAOS]

where can i get the quick release pin setup for my harness bar and door section of the roll cage so i dont have to climb over them?? thanks-dom

[Damn True]

"pip" pins

Aircraft spruce

[parsonsj]

I would look at Morrison's and DSE's offerings. Both have nice setups.

jp

[gmjj13]

http://www.summitracing.com/search/B.../?autoview=sku

[bret]

You might want to consider this:

http://www.ridetech.com/catalog/TigerCage-2490-1.html

[Damn True]

Unless I misunderstood, I think he has at least a 4pt in place and is looking for a removal capacity for the harness and door bar.

Did you ever get SCCA or NASA tech to sign off on that? Such a neat product. It would be great if you could get confirmation that the safety matches the ease of install and convenience.

[69projectKAOS]

yes i do have a 4 pt setup , and no i have not had a tech look it yet, cuz its stuck in paint jail for now which stinks but the bright side is i have a pill of parts building up in my room and i cannot wait to get her home and put all the new goodies on but i will try and find a picture of what im really looking for so maybe you guys could help me more thanks-dom

[69projectKAOS]

found a pic, is there anywhere i an just buy them separately??

[gmjj13]

here's what we used on mine. i'll try to get you some pics later on. hope this helps. its definately not as trick or cool looking as the tiger cage, but its a lot easier on the wallet.



http://www.swracecars.com/store/Tube...-OSCAR_85.aspx

http://www.swracecars.com/store/Brac...-OSCAR_43.aspx

[69projectKAOS]

gmjj13 those are exactly what i was looking for,yea if you could get me some pictures of how you set your car up,and exactly what pieces you ordered and how you installed them, that would be great

[Serpa69]

THis is what I did you can get the parts from chris alston they give you the pins. I bent my own bar.

[gmjj13]

as serpa69 said, here's a complete kit with pins for $80-85 depending on tube size:

http://www.cachassisworks.com/iwwidb...LEVIS?COMP=CAC

[69projectKAOS]

those are just what i was looking for< thanks guys for all your help!! i knew someone would know what i was talking about and just where to find them. thanks-dom

[EBMC]

Heres a setup we just completed on a 67 Camaro. Its got a spring loaded release in the bar and pivots on the front down tube. Alot easier than reaching over your shoulder and trying to line up a pin (and much stronger).

[69projectKAOS]

that does look kind of easier to maneuver , how much would it run me??

[EBMC]

We're working on putting a kit together, but we're a little ways off. I'll be posting a soon as we have something available.