Satchel Link Help

[Wicked Mayhem]

i have a few questions. i have did a little searching, but want some help on this.. i got alot of info from this thread..

https://www.pro-touring.com/forum/sh...ad.php?t=32893

ok...

upper bars will be 28" long.
lowers will be 36.5" according to my scaled drawing which must be off. cause i roughly mapped it out on the floor and the lowers would only be 30.5"



i am not sure i even have enough room, or if my drawing is even remotely close to being right. i TRIED doing it at 1:26th scale. the bars dont look to have near 45 degree angle.

little rundown of my specs im trying to work with

102.5" wheelbase.
i only have 28" from inside frame rail, to inside frame rail.
height of camshaft 24". right now im running 22od tires, and my cam appears to be right at the top of the tire, and i am planning on swapping to 26" tall so that should make the cam be 24"
i made the vertical line 46" from axle center line to intersection of arms.

i have a feeling i wasted a bunch of time doing this little drawing..