Rod Keeling's '67 Camaro Build

[RodDawg]

Well, I finally decided to post something about my '67 Camaro build. I've had this car for over a year, and after years of looking, reading, watching, etc... I had a pretty good idea of what I wanted (or so I thought). I bought the car in primer, no interior, with a 408sbc, TH350, 10bolt, and planned on steering it toward the pro touring side. I planned on mini tubs, lowering the suspension, adding some good shocks, wheels and a/c, then driving it. Yeah right........... Somewhere between hooking up with Frank Sarafine, and seeing this Orange '68 (Bad Penny) in every damn magazine I picked up, my plans changed a little. Out went the 408, TH350, 10bolt, front subframe, and everything else I could pull off.

The new plan is this:
L92 (with Mast L92SS Pkg)
4L80E
Moser 12-bolt
Prodigy / G-bar
Speedtech Subframe
Qa1 Coilovers
DSE Tubs
DSE Subframe Connectors
Fikse Wheels
Vintage Air
ISIS Wiring
Etc, Etc, Etc....




This is what I started with (straight car).



More to come..................