Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 13 of 13
    1. #1
      Join Date
      Jun 2009
      Posts
      37

      New guy with a 73 Nova

      Hello Everyone,

      Tomorrow I am going to pick up a 73 Nova from my my inlaws. Him and his friends drag race Novas and Carmaros and they were working on this one for their daughter but they decided they wanted a modern car. Since I have been into imports and drag racing since my teens, I am 32 now, I decided it would be a nice change. When I told a couple of my co-workers about the car they told me since I like classic cars and new technology that Pro-touring would be the way to go and they referred me to this site. I never hear of the term until they told me about and I like the cars and the work you have done to them.

      All I will say is I wish I went with domestics first. I have a 92 Eagle Talon Tsi which I am in the process of parting out to fund this project, and the amount of money I spent on aftermarket parts for her is insane compared to the aftermarket parts for domestics.

      Once I have the car home I will begin stripping the interior to see what rust repairs I will need to perform. I know the driver side rear wheelwell has a couple of rust holes, but I did not see any other signs of rust on the car.

      I will have pics up this weekend.

      -Brian



    2. #2
      Join Date
      Jun 2009
      Location
      Mississippi
      Posts
      21
      welcome

    3. #3
      Join Date
      Jun 2009
      Location
      Madison WI
      Posts
      65
      welcome! post some pics of that thing when you get it home.

    4. #4
      Join Date
      Jun 2002
      Location
      Long Island, NY
      Posts
      11,320
      Country Flag: United States
      Welcome to the site, Brian.

    5. #5
      Join Date
      Nov 2008
      Location
      iceland
      Posts
      1,859
      Country Flag: Iceland

    6. #6
      Join Date
      Jun 2009
      Location
      Seaside Ca
      Posts
      1

      New guy with 68 Chevelle

      Is there a formula to make a car a G machine? Or is it a timed event? As long as it is a blast to drive count me in.
      Attached Images Attached Images    

    7. #7
      Join Date
      Jun 2009
      Posts
      37
      Thanks guys! I'm about to head up there in a couple of hours so I will have some pics uploaded tomorrow.

      -Brian

    8. #8
      Join Date
      Jun 2009
      Posts
      37
      Attached are some pics of the car. I will locate a online photo album site to upload them to and provide a link to all of them.
      Attached Images Attached Images          

    9. #9
      Join Date
      Mar 2006
      Location
      New Carlisle Ohio
      Posts
      245
      Quote Originally Posted by B's Nova View Post
      Attached are some pics of the car. I will locate a online photo album site to upload them to and provide a link to all of them.

      Ahhh! Another big bumper Nova. A face only a mother, or a poor guy, can love! So do you have any specific plans?

      Welcome aboard!
      PartTime
      Chris Hager

    10. #10
      Join Date
      Jun 2009
      Posts
      37
      Quote Originally Posted by Part Time View Post
      Ahhh! Another big bumper Nova. A face only a mother, or a poor guy, can love! So do you have any specific plans?

      Welcome aboard!
      Thanks. My plans is to make it a quick street car with an occasional trip to auto-X. My plans first is to replace the suspension with something a little more up to the task, as well as converting the four wheel drums over to disk. Once I have her tighten up I will either fool with the 307 under the hood or swap it out for a 350, I am not sure yet as the engine runs fine and is pretty quiet for a 36 year old car.

      Structurally the body is fine with a little surface rust in the trunk and floor pans. I will put the car on jack stands this week and have a look under the car as well. It needs a paint job but that will be the last thing I will do. If anything I will have any dents and rust taken care on the outer sheetmetal and have the car primered black.
      -Brian Singleton

    11. #11
      Join Date
      Mar 2006
      Location
      New Carlisle Ohio
      Posts
      245
      Quote Originally Posted by B's Nova View Post
      Thanks. My plans is to make it a quick street car with an occasional trip to auto-X. My plans first is to replace the suspension with something a little more up to the task, as well as converting the four wheel drums over to disk. Once I have her tighten up I will either fool with the 307 under the hood or swap it out for a 350, I am not sure yet as the engine runs fine and is pretty quiet for a 36 year old car.

      Structurally the body is fine with a little surface rust in the trunk and floor pans. I will put the car on jack stands this week and have a look under the car as well. It needs a paint job but that will be the last thing I will do. If anything I will have any dents and rust taken care on the outer sheetmetal and have the car primered black.

      You've come to the right place. A lot of good people here ready to share a wealth of knowledge. Keep us updated.
      PartTime
      Chris Hager

    12. #12
      Join Date
      Apr 2009
      Location
      dallas, texas
      Posts
      127
      Welcome to the site. You will find all kinds of answers to your questions. Some helpful some not but its good reading material.

    13. #13
      Join Date
      Jul 2009
      Location
      Oregon
      Posts
      9
      welcome to the site




    Advertise on Pro-Touring.com