Results 1 to 2 of 2
-
06-11-2009 #1
New to Pro-Touring
- Join Date
- Jun 2009
- Location
- Brookfield, WI
- Posts
- 17
Lots of A/C Components... What will work?
I'm running a L76 out of a 2009 G8 GT in my 66 Impala. I have the Factory Dash with the vents in center and on the sides which i would like to keep stock. I will be using the dakota digital dash and so i wanted to use their climate control switching as well (perfect color match) which integrates with the vintage air gen-II.
I do not have anything for the fire wall from the factory unit.
What do i need to make this all work?
Are these components available for the 66 Impala?
Assuming i shave the firewall, are there custom componenets to take into consideration?
1966 Impala "Big Blue"
1967 Mustang Fastback "Eleanor"
2004 Pulse Red GTO
2009 Silverado Crew Cab
-
06-13-2009 #2
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
Several of the companies have bulkhead connectors to run ac and heater water through the firewall.
As I read this your looking to use Dakota Digital controls on a Vintage Air unit but the G8s AC compressor.
Very simply use the controls to activate a relay activating the compressor, and dont forget to follow instructions on wiring.
Just remember the G8 compressor clutch is most likely chassis ground with a relay controlling battery voltage to the clutch.
A Little more detail might help, and any references from instructions.
Reply With Quote
