Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Jan 2007
      Location
      Yardley, PA
      Posts
      163

      external anti-surge tank with A1000

      Hey all. I have my Buick Century wagon with a Turbo buick 6 (86/7 GN). The last owner just put a CE sump in the tank. I did the same thing to my malibu wagon for the FI. Both set-ups suck. The tanks are 18 gallons, when there is 5 gallon it start sucking air and stalling while accelerating, braking, turning, anything but sitting still. I have another g-body wagon tank I am gonna redo for my fueling needs. I have a few intank pumps, and I have an A1000. I was thinkin about building like a 1-2 gallon surge tank and mounting it right next to the stocker, it would be in the middle of the car in the back. I have the room. I would be using 2 pumps now instead of on, but I wouldn't ever have fuel starvation.

      Would the A1000 heat the fuel too much, this car is my everything car. Daily driver, weekend track beast. Since it's turbocharged, with so n2o and an alky kit on the way, it can't EVER suck air.

      Does anyone here use a surge tank? What pump are you feeding the surge tank with? How big is the surge tank? pics?


      Thanks guys.

      I did search around, but couldn't find too much. Custom tanks are out of the question, I have the tools and the skills to make something myself, not payind over 1G for a tank.



    2. #2
      Join Date
      Sep 2004
      Location
      Vacaville, CA
      Posts
      133
      Country Flag: United States
      I have a surge tank on my 64 Nova. It runs a stock 350 TBI. The tank is fed with a simple electric pump. It is about 1.5 gallons. The original in tank pump is in the surge tank. This set up has about 10K miles on it. It has never sucked air once. Works great, but like you say, you have to run two pumps.

      Tim

    3. #3
      Join Date
      Jan 2007
      Location
      Yardley, PA
      Posts
      163
      Great, thanks for the reply. I am just trying to be extra safe with fueling my turbo 6, it only takes one time running lean @ 20-24 lbs ya know?


      Thank you

    4. #4
      Join Date
      Mar 2009
      Posts
      15

      Surge tank

      I ve built and used surge tanks many times. I can Fab one for you for under $200. I usually make about 1 1/2 quarts with 4 bungs. 1-from pre pump 2- to hi press pump 3- return line from eng. 4- return back to tank... I have also pressurized the surge tank by installing a 2psi check valve on the ''return to tank'' bung. If you need help PM me. If you want one built, send drawing of waht will work for you and I will build a custom one for you... Mark

    5. #5
      Join Date
      Aug 2004
      Location
      Texas
      Posts
      327
      Country Flag: United States
      Curious, why do surge tank installs always seem to be feed with its own pump. Why can't the ssurge tank be part of the pressurized system? Seems like the plumbing would be simpler and only one pump would be required. The surge tank would sit between the 100 micron filter and pump followed by pressure reg w/bypass then on to 40 micron filter. -Bob
      -Bob (66 Nova)

    6. #6
      Join Date
      Jul 2006
      Location
      Keller, Texas
      Posts
      250
      Quote Originally Posted by BBPanel View Post
      Curious, why do surge tank installs always seem to be feed with its own pump. Why can't the ssurge tank be part of the pressurized system? Seems like the plumbing would be simpler and only one pump would be required. The surge tank would sit between the 100 micron filter and pump followed by pressure reg w/bypass then on to 40 micron filter. -Bob

      Becuase the "surge" part of the equation is to fix a starvation problem on the suction side of the pump, not a volume or supply issue on the pressure side. You can't plumb it like you would an accumulator in an oil system. On your oil system starving the pump and having the accumulator back you up can mean still having 40 PSI instead of 60 PSI for a few seconds on a hard launch or turn. On a fuel system only having that 40 PSI instead of 60 PSI can melt a piston or blow a head gasket pretty quick. Especially on a turbo car.

      If you can return your fuel to the surge tank then it doesn't have to be very big at all.
      Greg
      1970 challenger convert-in process
      1970 barracuda-driver

    7. #7
      Join Date
      Jan 2007
      Location
      Yardley, PA
      Posts
      163
      Dynoguy, I REALLY appreciate the offer. I'll PM you for a few tip or info if you don't mind. I'll fab it up in the machine shop here in work (I am in the military). I'll be using a check valve I think since the HP pump will be an A1000.




      Becuase the "surge" part of the equation is to fix a starvation problem on the suction side of the pump, not a volume or supply issue on the pressure side. You can't plumb it like you would an accumulator in an oil system. On your oil system starving the pump and having the accumulator back you up can mean still having 40 PSI instead of 60 PSI for a few seconds on a hard launch or turn. On a fuel system only having that 40 PSI instead of 60 PSI can melt a piston or blow a head gasket pretty quick. Especially on a turbo car.

      If you can return your fuel to the surge tank then it doesn't have to be very big at all.
      GKring, you have it right for me, having a turbo car that is exactly what I am worrying about. I am worried about returning it to the surge tank, since the A1000 heats the fuel up pretty good from what I understand. If I have fuel vapor lock problems with that pump, I'll change it out with a walbro or bosh pump.

      BBpanel, I tried something to what you said on my other wagon, using a huge fuel filter that hold a bunch of fuel, and it doesn't work. When the pick up gets uncovered, it sucks the air and introduces it in the pressurized system, and you still get air pockets into the fuel rail and a stall. That's what happens to me anyway.

    8. #8
      Join Date
      Sep 2004
      Location
      Vacaville, CA
      Posts
      133
      Country Flag: United States
      You really need to have the engine return go to the surge tank first. That guarantees the surge tank has fuel at all times. Otherwise you would need a higher volume pump to supply the surge tank. If fuel temp is a concern, you could run it through a cooler, maybe on it's way back to the surge tank.

      Even though you have to run two pumps, the system works real well. In my case, I copied the idea from the rock crawler guys.

      Tim

    9. #9
      Join Date
      Jan 2007
      Location
      Yardley, PA
      Posts
      163
      I was thinking about the fuel cooler idea also. I'll have to rig a temp gauge or something in the tank to make sure the fuel isn't getting ridiculously hot. This will be driven every day. I like to drive the wheels off my cars so it is important to work and be dependable, within reason of course.

      Thanks for all the input guys. I'll be making a cardboard template during the week to take to work so i can fab it up. I'll post pics of the progress.




    Advertise on Pro-Touring.com