Results 1 to 20 of 120
Thread: Crisis
Hybrid View
-
08-18-2009 #1
Registered User
- Join Date
- May 2009
- Location
- Centennial, CO
- Posts
- 402
You aren't messin around! Impressive!
-
08-18-2009 #2
Registered User
- Join Date
- Dec 2006
- Posts
- 543
Holy crap you tore that bad boy down!!!
Good job. Keep up the progress.
08-18-2009 #3
Registered User
- Join Date
- Jan 2008
- Location
- Perth Western Australia
- Posts
- 233
Thanks for the feed back guys, I will try to keep it more up to date.
GregUsed to be known as tonner
08-23-2009 #4
Registered User
- Join Date
- Jan 2008
- Location
- Perth Western Australia
- Posts
- 233
Ok I got a bit more done this weekend.
I soda blasted these panels and primed them with epoxy.
Used to be known as tonner
08-23-2009 #5
Registered User
- Join Date
- Jan 2008
- Location
- Perth Western Australia
- Posts
- 233
I wasn't happy with the semi flat firewall, so I decided to start putting together a new flat firewall.
I made up a template out of cardboard.
Transfered it on to 16 gage sheet and cut it out with the plasma.
Cut out the firewall
Test fitting the sheet.
Used to be known as tonner
08-23-2009 #6
Registered User
- Join Date
- Jan 2008
- Location
- Perth Western Australia
- Posts
- 233
Made another template to fill the trans tunnel.
Transfered it to sheet and cut with the plasma.
Started bending it into shape, but ran out of time, so I will finish it next time.
Used to be known as tonner
08-23-2009 #7
Registered User
- Join Date
- Dec 2006
- Posts
- 543
Good work Greg.
Reply With Quote
