Orange Peel

[PRRC]

I will stick to what I had said before. 2 coats is not enough to wet sand and buff. We do this every day for a living. We are a full service shop. If you only lightly wet sand the panel and not remove all the orange peel and try to buff the panel will look hazey. there is no reason to wet sand if your not going to remove all the orange peel. The process we use is 800 to level the clear and remove any orange peel. the next sanding steps 1000,1500,2000 are to remove the sand scratches and ready the panel to polish. we shoot 2 coats on small parts we will not buff. anything that will be buffed recieves 3 coats. all wet coats. we have been at this for more than 30 years.