looking for 67 chevelle suspension info

[smokey]

New to the site and the board looking for good suspension info for my 67 chevelle

[derekf]

Welcome to the site. A search will likely find you lots of good information, otherwise, post up your specific questions in the appropriate forum.

We do like names and pics; do you have either one?

[1971CHEVELLE]

Welcome to the site

[1968CamaroSS_Sam]

Welcome to the site. I love the Chevelles.

[smokey]

In the process of collecting all the parts for the suspension and was wondering what to do to the rear, as far as coilover shocks, panhard bar, swaybar, setup and location of these parts and hints or ideas would be greatly appreciated. I do not have a set idea or application in my head but would like to see whats out their.

[rickk]

call kyle at dse.
rick k

[ProdigyCustoms]

There are a lot of god choices. Hotchkis, DSE is real cool stuff. And air ride is always a option.

What you going to do with the car and budget are both big factors in good project planning.

[smokey]

Thanks for steps in the right path, ill do some follow up calls and see where i set after that

[smokey]

I had started to purchase some parts before i found out about this site. For the front i purchased a ssbc front disc conversion kit with 2" drop spindles, the QA1 procoilover conversion kit w/350lb springs. For the rear I purchased all edelbrock parts consisting of lower trailing arms, upper control arms, antihop bars, & trailing arm mount braces. I plan on spending between 1600 to 2000 more on the suspension to complete it . Was looking around DSE and the tublar rear sway bar looks inviting as does the front splined front sway bar. Would like input on how the rear QA1 coilover shocks perform .