Results 1 to 3 of 3
Thread: window winders
-
05-03-2009 #1
Registered User
- Join Date
- Aug 2004
- Location
- chambersburg
- Posts
- 86
window winders
putting finishing touchs on on wifes car and we built custom door panels and the problem i am having is, the window cranks wont fit. the regulator stub is to short for the door panel being to thick.does anyone know of some type of extension for the window cranks. thanks shawn oh and i've searched this several differen't ways
-
05-04-2009 #2
Registered User
- Join Date
- Sep 2006
- Posts
- 285
Cut it
Cut the gear off and weld a piece of rod between the 2. Just make sure that you cut back far enough to get the clip too.
So ... Slap some power windows in it.
05-05-2009 #3
Registered User
- Join Date
- Oct 2006
- Location
- Phoenix, AZ
- Posts
- 826
I'm having a similar problem with my reproduction deluxe door panels. They're so thick that the factory crank won't reach the factory original deluxe-style window regulators.
We should ask Fesler if he could machine some with a longer shank on them.Jeff K.
69 Camaro SS, 406 SBC, TKO600, 9" w/3.73 tru-trac, Speedtech Arms, AFX Spindles, Lee 670 Box, Baer GT front, C5Z rear. Hyperco Leafs w/ Fays2 Watts Link + Varishocks.
Reply With Quote
