Results 1 to 5 of 5
Thread: flywheel help
-
03-16-2009 #1
Registered User
- Join Date
- Feb 2009
- Location
- Long island, New York
- Posts
- 668
re: flywheel help
i have a 355 sbc 450hp, th400 and i am purchasing a hughes performance 2000-2500rpm stall converter and i said to myself while im at it get a better flywheel! i was wondering what would be a good application? i am mostly going to do cruising but i also want it to perform when i need it to! any help is appreciated! thanks -dom
Dom Buffa
69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas
-
03-18-2009 #2
Registered User
- Join Date
- Mar 2005
- Location
- Loganville, GA
- Posts
- 931
A quality, SFI rated flexplate (flywheels = manual trans) would be a good choice. I would stick with a known brand name, since it is your life/legs/feet on the line.
2018 Cruze LT Hatchback
2003 Suburban 2500 8.1L
1975 MGB Roadster
2003 GSX750F Katana
-
03-18-2009 #3
Registered User
- Join Date
- Feb 2009
- Location
- Long island, New York
- Posts
- 668
does a 168 tooth flexplate sound reasonable for my 355sbc 450hp,th400(auto) 2500rpm stall convert?? thaknks
Dom Buffa
69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas
-
03-19-2009 #4
Registered User
- Join Date
- Feb 2009
- Location
- Long island, New York
- Posts
- 668
....
Dom Buffa
69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas
-
03-21-2009 #5
Registered User
- Join Date
- Mar 2005
- Location
- Loganville, GA
- Posts
- 931
The 168 tooth flexplate will work fine. Just get a starter to match.
2018 Cruze LT Hatchback
2003 Suburban 2500 8.1L
1975 MGB Roadster
2003 GSX750F Katana
-
Reply With Quote
