Results 1 to 20 of 74
Thread: The Official Tube Bending Thread
Hybrid View
-
06-08-2009 #1
Starting The Transformation
- Join Date
- Feb 2009
- Location
- Manitowoc Wisconsin
- Posts
- 202
Any questions on roll cage fabrication? C'mon guys.
-
06-08-2009 #2
Sponsor / Rat Pack Member
- Join Date
- Aug 2006
- Location
- Nashville TN
- Posts
- 771
Shane,
Can you list out the different types of tubing and thickness used in roll cage and tube chassis fab? Also a general guide as to when to use which.
Thanks,Brian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com
06-09-2009 #3
Starting The Transformation
- Join Date
- Feb 2009
- Location
- Manitowoc Wisconsin
- Posts
- 202
Wheew! That would be a ton of info. Let's start out slow.....
Originally Posted by Finch
Most of the guys building dragsters and dragster cages are using 1 5/8" x .083" wall chromolly. A 6" or a 6.5" center line radius die set works well for this material.
Whats next?
Reply With Quote
