Results 1 to 9 of 9
Thread: Coil spring adjusters
Hybrid View
-
03-07-2005 #1
Starting The Transformation
- Join Date
- Jan 2005
- Posts
- 160
Hmmmm. I suppose you can mount them either way. I've only ever seen them mounted with the adjuster up in the pocket though. Of course now that I think of it, most I've seen were being used by people who were trying to hide them for cheating purposes.
Let us know how they work that way and if they're easy to adjust. pics would be good too.
I'm going to use the weld in's on mine but I like the idea of the drop in's too.
Wally
-
03-07-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- Phoenix AZ
- Posts
- 292
For sure Wally, the hang up will be that the coil is open on the bottom, if we can get one end to sit flat this will work good, it puts the adjuster in a nice easy spot to adjust it. And yeah these were designed to cheat, but I dont see why we cant make it easier on our selves and try to put the adjuster on the lower control arm.
03-07-2005 #3
Starting The Transformation
- Join Date
- Jan 2005
- Posts
- 160
Just mount the spring upside down too, right? At least that would work with a set of AFCO's.
Wally
03-07-2005 #4
Registered User
- Join Date
- Aug 2004
- Location
- Phoenix AZ
- Posts
- 292
We, will have to see what these hypercoils look like, but yeah, well no, cause the adjuter, you would want the flat side on it, and you need a flat side in the upper spring bucket, unless Im confussed or making a bigger deal out it then ther needs to be. :rolleyes5
Reply With Quote
