Results 1 to 6 of 6
Hybrid View
-
03-07-2005 #1
Registered User
- Join Date
- Nov 2004
- Location
- Colorado
- Posts
- 1,260
Stainless Works BBC headers 69 Camaro
Anyone using these? I'm thinking about getting a set of their 2" headers to replace the mid length hedmans I have now. My car is dropped 2" and ground clearance is quite important to me.
-
03-09-2005 #2
Registered User
- Join Date
- Oct 2003
- Location
- South Lyon, MI
- Posts
- 193
I don't have their BB headers. Their headers on my LT4 are nice and close to the floor. I spoke to them a few times prior to purchasing. They were able to assist me.
Kevin
03-09-2005 #3
Registered User
- Join Date
- Nov 2002
- Location
- Georgetown,TX
- Posts
- 2,557
If I ever switch to a big block,Stainless Works is probably the way I'll go.
What are your thoughts on the Hedman's?
03-10-2005 #4
Registered User
- Join Date
- Nov 2004
- Location
- Colorado
- Posts
- 1,260
The hedmans fit OK, the steering arm on the PS box has dented one of the tubes.
Originally Posted by USAZR1
The concern that I have is that I am leaving HP on the table because of the short, unequal length 1 3/4" primaries.
I have a set of Dynatech long tubes on my 99 Corvette, they fit beautifully, and I got to thinking that someone has got to be able to make a set for a 69 Camaro that fit that well. They also gave a huge lower end increase, that increased the fun factor of the car in a big way. The long tube design is excellent for street cars.
03-10-2005 #5
Registered User
- Join Date
- Jan 2002
- Location
- Italy
- Posts
- 746
How are the prices from stainless works ???
Thanks!
André
03-10-2005 #6
Registered User
- Join Date
- Nov 2002
- Location
- Georgetown,TX
- Posts
- 2,557
A pair of 2" BBC headers from Stainless Works retails for approx $600. They can build you what you want,within reason. I was thinking about a pair of 1 3/4" or 1 7/8" tubes with 32" primaries and 3" collectors. Originally Posted by Tigergutt
Reply With Quote
