C5 Brake Adapters for 2nd Gen needed

[72SSAbody]

Vince,
Take a look at the 7075. I think you'll like the properties of it.

JOE, what am i lookin' at price wise to do this on a second gen camaro? especially if i don't have access to a lathe to get the hubs done. Would you be willing to fab a set for me for a price?let me know, thanks!

-dongee

Price wise you'll be a heck of a lot better than the '64-'72 GM A-body guys. I've had guys scrounge around on 'vette forums and have put this system together for $300 (which includes some new parts).



Rotors you can get from www.rockauto.com for $16 a side plus shipping or NAPA has them for $25 a side if you don't want to pay shipping.

The "hurdle" is the hubs (like RJ points out), but its really not that bad of a hurdle to overcome. I'm sending off a set of rotors today to have machined into hubs. If you are interested just PM me and I can work out a set for you. I don't know final price, but I can tell you it isn't going to be at the cost of custom hubs that are out there.

Joe