old trim ??????

[indyjps]

trim polishing isnt difficult, you just need to pay close attention to your work to avoid snagging it. I work dents out with a piece of oak or similar hardwood, sometimes have to make a form to fit the front side on badly damaged pieces.

[Jim Nilsen]

trim polishing isnt difficult, you just need to pay close attention to your work to avoid snagging it. I work dents out with a piece of oak or similar hardwood, sometimes have to make a form to fit the front side on badly damaged pieces.

I found out the hard way when buffing wood products at a shop I worked at years ago and that is you will catch the buffing wheel on the most important piece while thinking about trying not to snag it


For a person who doesn't do it all of the time it is a great feature to have the clutch. The drill is also the perfect rpm compared to a bench grinder that is usually double the rpm needed to do buffing.

I did pick up my buffing/sanding wheel for $60 and the drill is over $200 for the Dewalt. I don't know how a cheap drill will hold up to the side forces of buffing but the Dewalt is holding up fine and it has many hrs of regular work on it and about 40hrs of hard buffing or more.

I started using the drill because I needed to use the cone to get in a few places on suspension parts and I didn't want to go thru the hassle of mounting it to the the big buffer. So I put it in the drill and was doing the parts while holding them in the vise and then I switch them around and really liked it then.

It is however not very difficult as you say and the great thing about using wood as your tools to fix dents is that it is easy to shape to the right contours.

maybe we can at least convince a few more people to do their own no matter how they do it !!!!!!

[Rag-Rat]

I used Bob Brunte from Texas. My stainless had dings and needed polishing. I was very happy with the work and turn around time (one week). Not the cheapest but if you want good work, then pay a little more. Each piece was returned individually sealed which was great since my car isn't ready to be painted yet and will be sitting on a shelf for months. His phone is 817-307-2555 or e-mail [email protected]

[bbcc]

Haha, man I totaly got the wrong impression from the thread title.

[TonyHuntimer]

You guys are all giving great tips for polishing, but it sounds like 70SSNova needs more than just polishing.

Repairing damaged trim is an art. Few people have the skills.

Somebody here on the board said they've had great luck with Accessories Plus in Belmont, CA (650) 591-2400. Since you're back east, I'm sure there are shops closer to you.

Good luck,
Tony Huntimer
RaceHome.com

[Jim Nilsen]

You guys are all giving great tips for polishing, but it sounds like 70SSNova needs more than just polishing.

Repairing damaged trim is an art. Few people have the skills.

Somebody here on the board said they've had great luck with Accessories Plus in Belmont, CA (650) 591-2400. Since you're back east, I'm sure there are shops closer to you.

Good luck,
Tony Huntimer
RaceHome.com

You are so right Tony. If he has bad trim that needs reworking and hard to find he needs more than a buffer.

I have seen My Clssic Car always talk about Paul's .
They are in Pennsylvania
www.PaulsChrome.com

Bad chrome plating always leaves a bad reflection for all to see

[BADNBLK]

Another one that is good...

www.StainlessTrimWorks.com

Rodney is a friend of mine and does A+ work. Second genration re finisher! So he has seen them all.