Results 1 to 20 of 22
Threaded View
-
02-28-2005 #2
Registered User
- Join Date
- Aug 2003
- Location
- Prescott Valley, AZ
- Posts
- 820
Use paper….lots of it!!
I have done this before however I had CAD at my disposal. If you do as well have it drawn up and printed at full scale. Place the paper over the part and use a center punch (cause I didn’t have a mill – sill don’t) and go at it. I suppose you could use a pencil and paper to do the same thing but where is the fun in that?
-
Reply With Quote
