Results 1 to 4 of 4
-
10-29-2008 #1
Registered User
- Join Date
- Oct 2008
- Posts
- 2
1993 GMC Jimmy TCC unlock switch?
Does anyone know if I can install a switch in my 93 Jimmy to unlock the torque converter when I'm towing. I would like to be able to tow light loads in 4th gear and not have to manually shift to 3rd.
I know many newer pickups have a "tow" switch and I think it just unlocks the converter.
I would think a switch in the correct wire off of the TCC switch on the brake pedal would do it, but I can't find any info or schematic to help. If anyone has done this; What type switch will work and which wire is it.
Thanks; 93 Jimmy
-
10-30-2008 #2I don't think that's a good idea. You will overheat the fluid like that.
What "Tow/Haul" mode does on the newer trucks is lock the converter in second and third gears, as well as OD, and also raises the line pressures and shift points.
11-02-2008 #3
Registered User
- Join Date
- Oct 2008
- Posts
- 2
Well it seemed like a good idea.
I have just lightly touched the brake pedal on slight up grades with my boat in tow and it seems to kick the rpm up just enough to not seem like it is lugging the engine. This doesn't drop the mileage as much as manually pulling it down to drive or just setting the cruise & letting it go.
The trans fluid has about 55K miles on it, doesn't smell bad and is just as pretty pink as new.
Thanks for the input; 93 Jimmy
11-08-2008 #4



Reply With Quote