Old Project Needs A New Skin

[Brian46]

While it's not normal at all for any professional shop to lay filler that thick, unfortunately shops like that are everywhere. I am amazed at your depth measurement of .357. That filler is almost 3/8" thick. It will certainly crack and fall off. It's obvious that the shop cut corners to avoid doing the work properly and now sadly, you are going to have to pay to redo the car. I can help with your situation, but the car will have to be stripped to bare steel again. Feel free to contact me for assistance if you like.

Thanks,
Nick @ MWCC

www.m-w-c-c.com

Thanks for the offer, I am in Langley,BC...Canada. I think shipping will kill anything that I might save. Stripping the car is going to be a costly affair, the blaster can said he can only do certain areas, filler is too thick in most places he said. I also looked into acid dipping the car again, but the box liner stuff on the underside (never seen box liner as ugly or thick) has to be manually removed befor dipping, plus the dipping is a costly affair here since only one place can do it. Got any other ideas on stripping the car down?