Backspacing with AFX spindles and C5 brakes

[KlartDer]

Hi.

I have tried searching the forums and was able to get a partial answer on this, but want to make sure.

I have ordered a set of AFX spindles and C5 brakes for my 69 Camaro, and am planning on mounting a pair of 18x8.5 ET13 (roughly 5.25" backspacing) wheels. Will this work as it is or with a small spacer?

Most posts reveal, that the AFX spindles does not change the track width, but is this also the case with C5 rotors mounted?

Thanks,
Jakob

[The WidowMaker]

if the ats spindles dont change the track for your car, the only difference would be if the c5 stuff had a thicker rotor pad. if so it would be very little. call tyler at ats and confirm. he should know off the top of his head.

i would be more concerned about those wheels fitting the c5 brake calipers. kore3.com has templates, but you may have already known that.

Tim