Simple Question* LS1 68 Camaro

[68rsss]

I have this thread in the electrical section also.


My harness said nothing about the altenator wire so I connected it directly to the battery.

The other day the altenator was generating 17vdc and now it's dead and doesnt charge.



I just wanted to check and be be sure that on the LS1 altenator the little red wire should be connected to the battery directly, correct?

Thanks in advance,
Jer

[dhutton]

There is a lot of information on this topic on ls1tech.com in the conversions forum. Here is a start:

http://www.ls1tech.com/forums/showthread.php?t=779728

Don

[CarlC]

On my 2002 LS1 Camaro harness/alt/ECM there is only one red wire and it is attached to the ECM. The ECM controls the alternator function. The main charging wire does go to the + bat.

[68rsss]

Thanks Guys, i have access thru a mech freind of mine to a website called alldatapro.com. I found the same info this afternoon after I bought a new altenator and had the same results.

[68rsss]

This worked! Thanks guys.