Results 1 to 5 of 5
Thread: saggy panels
Hybrid View
-
06-21-2008 #1
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
Metal will move around if not supported. If you are going to get it blasted, you can just cut small sections out to gain access for the blaster. Don't cut the full section out.
Be the best way to get around more work later.
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
-
Reply With Quote
